Muti - Current Dali 70W LED Driver Dimmable High Efficiency 270x40.5x22.9mm ML70C-PD manufacturer from China Shenzhen Merrytek Technology Co., Ltd.

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

Model No.: ML70C-PD

1x70W Muti-current 350mA-700mA Optional By DIP Switch DALI And PUSH Dimmable LED Driver, 270x40.5x22.9mm</stron

1x70W Muti-current 350mA-700mA Optional By DIP Switch DALI And PUSH Dimmable LED Driver, 270x40.5x22.9mm

Description:

1, ML70C-PD is special for both DALI and push dimming .

2. Support Max 200vDC output

3, Compatible with latest DALI interface IEC62386-101,IEC62386-102,IEC62286-207

4, Multi output current 350mA to 700mA selectable via DIP switch.

5, Memory function: Lights returns to previous dimming level when switch off and on again, even at mains restores.

6, No need additional synchrony wire, up to 15pcs drivers should be controlled by one dimmer.

7, Maximum length of the cable, from push button to last driver is 20m

8, Press-in terminals in primary and secondary side, easy assembly

9, Protection: Short circuit / Over voltage / Over temperature

10, 5 years guaranty

Specifications

INPUT	Input voltage	220-240Vac
	Input frequency	50-60Hz
	Input current	0.17A max
	Power factor	≥0.90
	Efficiency(Note1)	≥85%
	Leakage current	0.5mA/240Vac
OUTPUT	Output current and load	350mA 50-200VDC 400mA 50-175V DC 450mA 50-156V DC 500mA 50-140V DC 550mA 50-127V DC 600mA 50-117V DC 650mA 50-106V DC 700mA 50-100V DC
	Output load range	1x70W max
	Current accuracy	±5%
	Dimming mode	DALI, PUSH
ENVIRONMENT	Working temp.(Ta)	-20~50
	Surface temp.(Tc)	75max
	Working humidity	20~90%RH non-condensing
	Storage temp.	-40~80
	Life time	≥50000hours
PROTECTION	Isolation class	Class II, SELV
	Protection class	IP20
	Short circuit	Protection type; auto rest
	Over voltage	Protection type; auto rest
	Over temperature	Protection type; auto rest
SAFETY&EMC	Safety	EN61347-1 EN61347-2-13
	EMC	EN55015, EN61000-3-2ClassC
	EMC	EN61000-3-3, EN61547
	DALI interface	IEC62386-101, IEC62386-102, IEC62386-207
	Approvals	CE
	Withstand voltage	IN-OUT:3.75KVAC/5mA/1min
NOTE	1, Efficiency is measured at 550mA/55Vdc output set by DIP switch 2, All parameters not specially mentioned are measured at 230Vac input, rated load and 25of ambient temp.